NEO Super Cascom
The Neo Super Cascom features a specialized spiral ceramic heater element which precisely melts the alloy at desired temperatures.Such precision heating eliminates overheating of the alloy and therefore minimizes porosity.
NEO Super Cascom
Sold only in the U.S. and Mexico
A vacuum and pressure casting method is utilized which results in razor-sharp margins and extremely dense casts.
Discover for yourself the simple and worry-free casting process of the Neo Super Cascom in the Product demonstration video below.
If you can operate a microwave oven, you can produce casting with high-quality, dense, and razor-sharp margins with ease using the Neo Super Cascom.
Focused on eliminating air bubbles from melt alloys under the microscope.
PRODUCT INFORMATION
Ceramic Heating with Vacuum and Pressure
The Neo Super Cascom features a specialized spiral ceramic heater element which precisely melts the alloy at desired temperatures. The ceramic heater allows technicians to accurately adjust melt temperature by 1°C or F. Such precision heating eliminates overheating of the alloy. This allows casting to be done at the lowest possible temperature, which translates to porosity-free dense castings with ideal alloy characteristics.
Under a microscope, it is easy to see the smooth surfaces and sharp margins that can contribute to a longer life for the completed restorations.
Programable Casting Cycles with Argon Gas
The Neo Super Cascom features programmable casting process for each type of metal and the unit is also capable of melting an alloy in air or argon gas atmosphere, which works to prevent oxidization of the alloy and helps to achieve cleaner casting results.
Alloys
The Neo Super Cascom is capable of casting a wide range of alloys including precious metals, semi-precious metals, and non-precious (except for titanium) to fabricate inlays, crowns, implants, and partial frameworks. Its maximum melting capacity is 150 grams (5oz) for precious and semi-precious and 45g for non precious alloy, allowing technicinas to even cast full mouth cases.
Requirements
- AC 220V. 50/60Hz. Max 2.5kVA
- Requires 100psi – 145psi of Pressurized Air
- Argon Gas Tank with a Regulator (if you cast a metal that contains Pd more than 30%) Individual purchase required dental Technologically, For Melting Non-Precious Alloy (Co-Cr, Ni-Cr) needs Argon Gas flow is known.
- Vacuum Pump Sale Separately
Specifications
Power Requirement:
AC 220V. 50/60Hz. Max 2.5kVA
Vac Pump Outlet:
Single Phase 220V（DDP40, 2223GCE）Sale Separately
Pressurized Air:
0.75MPa – 1.0MPa (110psi – 146psi)
Dimension:
20 (w) x 21 (h) x 20 (d) inches
Weight:
109lbs (49kg)
Melting:
Ceramic Heating
Casting:
Vacuum and Pressure
Max Temperature:
1,530°C (2,786°F)
Max Melting Capacity:
Precious Alloy 150g
Non-Precious Alloy 45g
Casting Ring Size:
Max. Ø90mm
Min. Ø43mm